Ferrocement is a cement-based composite in which rich cement-sand mortar — sometimes described as micro-concrete — is reinforced with several continuous layers of small-diameter steel wire mesh. According to the Ferrocement Model Code (2001), it is classified as a type of reinforced concrete built from hydraulic cement mortar reinforced with closely spaced layers of relatively fine wire mesh, which may be metallic or made from other suitable materials. The fineness of the mortar matrix must match the mesh openings it encases, and the matrix can also contain discontinuous fibres. Because the reinforcement is distributed evenly across a high surface-area-to-volume ratio, the material develops a pronounced crack-arrest effect: strains concentrate near the mesh rather than propagating through the mortar, which is the core structural principle behind ferrocement.
What materials go into a ferrocement mix?
The basic constituents are cement, sand, water and wire mesh. Ordinary Portland cement is the standard binder. Mix proportions are tightly controlled:
- Cement-sand ratio: 1:1.5 to 1:2.5 by weight
- Water-cement ratio: 0.35 to 0.50 by weight
- Wire diameter: 0.5 to 1.5 mm
- Mesh spacing: 5 to 25 mm apart
Several mesh types have been used in practice, including hexagonal mesh (commonly known as chicken wire), woven mesh, welded mesh, expanded mesh and Watson mesh. The choice of mesh type and spacing governs how finely the reinforcement is subdivided within the mortar, which in turn determines the magnitude of strain the composite can absorb before cracking.
Where is ferrocement used?
Ferrocement is suited to thin-walled structures that rely on form or shape, rather than mass, for strength and rigidity. It can be moulded into a single continuous piece and tailored for directional strength, and its advocates cite low material cost and non-flammability as further advantages. Recorded applications span both land and marine construction, including:
- Housing, particularly roofing elements
- Water tanks, pipes and reservoirs
- Boats, barges and vessels
- Swimming pools
- Farming structures, silos and warehouses
These use cases reflect ferrocement's defining trait: a lightweight shell that still carries considerable load, which is why it found early traction in regions where conventional reinforced concrete or steel-reinforced structures were costlier to build.
How did ferrocement become a recognised construction material?
Systematic scientific study of ferrocement's properties intensified from the late 1960s, encouraged by a panel review from the National Academy of Sciences in 1973. That momentum led the American Concrete Institute to form a dedicated Committee on Ferrocement in 1975. A year later, in 1976, the International Ferrocement Information Center was established in Bangkok, Thailand, which subsequently consolidated publication of the Journal of Ferrocement. This institutional backing helped formalise design guidance that eventually fed into the Ferrocement Model Code.
How does ferrocement compare with other cement composites?
Ferrocement sits alongside other reinforced cementitious systems such as conventional reinforced cement concrete, fibre-reinforced concrete and polymer concrete, all of which emerged from the same industry drive to find materials that are inexpensive, easy to mould and durable. What distinguishes ferrocement is the sheer density and fineness of its reinforcement layers compared with the coarser reinforcing bar used in standard structural concrete. For engineers and specifiers working with thin-shell or lightweight precast elements, this places ferrocement in a similar design conversation to modern high-performance mixes like UHPC, where reinforcement geometry and mortar fineness are equally central to performance — though the two materials differ substantially in their respective reinforcement systems and matrix compositions.
No binding design standard for ferrocement in the UK market is referenced in the material above; project teams should consult the applicable national design guidance for shell structures and mortar-based composites before specifying wire-mesh reinforced systems.


