3D concrete printing (3DCP) is a form of additive manufacturing in which a computer-controlled system extrudes cement-based mortar layer by layer to form building components or in-situ walls, eliminating the need for conventional formwork. It is not a single standard mix or fixed product: outcomes depend heavily on print settings, nozzle geometry, and the rheological behaviour of the material at the moment of deposition.
According to a research roadmap published in Cement and Concrete Research (October 2018), large-scale construction additive manufacturing is defined as the computer-controlled placement of extruded cement-based mortar in layers. In practice, a robotic arm or gantry system carries a specialised printhead. A pump feeds the mix through a hose into that printhead, which deposits it in precise, successive layers that follow a digitally sliced 3D model. Slicing software translates the design geometry into machine instructions, controlling layer height, print speed and deposition pattern. Once printed, the layers gain mechanical strength through a controlled drying and hydration process — the equivalent of curing in cast concrete.
Read moreSelf-Healing Concrete: Mechanisms, Standards and Crack-Width Limits Explained
Unlike transport beton poured into formwork, there is no mould holding the material in shape while it hardens. The mix itself has to be engineered to stand without support immediately after extrusion, which is why mix design and printhead technology are inseparable in this field.
A 3DCP system requires slicing software that converts a 3D model into toolpath instructions; a robotic arm or gantry system that controls printhead movement; a custom-designed printhead mounted on the robot or gantry; a pumping system that delivers the prepared mix through a hose to the printhead; and a mix formulated for pumpability during transport and for immediate shape-retention once extruded.
Because there is no formwork, the fresh mix must satisfy several competing rheological demands at once: it needs to flow through the hose and printhead, hold its shape once deposited, and bond adequately to the layer beneath it to avoid delamination. Material behaviour at the nozzle is therefore just as important as the final hardened properties normally assessed through compressive strength classes.
The technology sits ahead of its own normative framework: print parameters, interlayer bonding performance and structural design rules for printed elements are still being worked out at committee level rather than codified in a finished, universally adopted standard. Anyone specifying a 3D-printed structural or in-situ element currently has to rely on project-specific testing and documentation rather than a single off-the-shelf code reference.
Because printed elements are built from discrete deposited layers rather than a monolithic pour, questions around anisotropic strength behaviour, interlayer durability and long-term performance under load remain active research areas rather than settled engineering knowledge.

